Maintenance and maintenance of high frequency welded pipe unit

The high-frequency welded pipe unit will always be damaged during normal work. How to maintain it correctly in daily life so as to prolong its service life is a matter of concern to everyone. Let me explain to you below.

In the process of use, it is necessary to strictly follow the operation process in the manual. Before the operation of the machine, it is necessary to check whether the various parts of the machine can work normally and whether there is any fault. Only when the parts and indicators of the machine are normal, we Only then can it be started and put into production, otherwise it will cause damage to the machinery.
After checking the components of the high-frequency welded pipe unit, it will start to run. In the process of mechanical production, it is necessary to ensure the stability of the temperature and production conditions of the machine. If the machine fails, we need to stop production in time and check which parts of the machine have failed. , so as not to cause greater losses. The main faults include unstable mechanical operation and whether there are abnormal noises during operation. If there is a problem, it should be checked in time.
After the machine has been used for a period of time, pay attention to lubricating and cleaning the machine regularly to ensure its cleanliness. Only in this way can the machine run normally and be relatively light during use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. When the machine is not in use, the high-frequency welded pipe unit should also be kept well, and it cannot be discarded arbitrarily.
Commonly used maintenance methods:
1. Do a good job of inspection of the high-frequency welded pipe machine on weekdays, check whether the pipeline is normal, and record the mechanical condition of the solid-state high-frequency welded pipe machine truthfully. If it is found that there is a risk of future troubles in the solid-state high-frequency welded pipe machine, it should be repaired quickly to avoid affecting the normal operation below use.
2. The parts of the high-frequency welded pipe machine that need to be lubricated should be lubricated on schedule, and lubricated with a special lubricant to prevent the welded pipe from rusting. Galvanizing is a good way to prolong the service life of the welding machine. Surface pretreatment is required before galvanizing steel pipes. The treatment usually includes degreasing (degreasing is to clean the oil stains and dirt outside the clarinet, in order to prevent the effect of acid pickling, daily alkali washing can be completed by burning or alkali), washing, pickling, and then washing with water.
3. Although some stains are cleaned by alkali cleaning, pickling and alkali cleaning are different for dirt. The purpose of pickling is to remove the oxide scale on the mechanical surface of high-frequency welded pipe machine. Pickling can be carried out at room temperature, and the metal corrosion is less , less hydrogen absorption, less mixing compatibility for carbon black residues, pickling to form oxides, large depth, easy to clean, no effect on galvanizing