What are the advantages of the new steel support formwork reinforcement system?

After years of development, the advantages of the new steel support system have been widely recognized, have many advantages, and have been accepted by most building developers, construction units and construction personnel.

Compared with the traditional reinforcement system, the new steel support system uses steel instead of wood. The new steel support formwork reinforcement system has the following advantages:
1. Good molding effect
The new steel support system has high strength and stability. The solid reinforcement system can prevent mold expansion, grout leakage and structural deformation, especially for actual measured quantities.
2. Low cost
The new steel support system can be recycled more than 500 times, has low single-use cost and high residual value rate, making it a relatively environmentally friendly material.
3. Conducive to safe and civilized construction
During the construction of the new steel support system, after the formwork is removed, there will be no garbage, no rust, no fire hazards, no wood chips left by electric saws and other construction debris at the construction site. The construction site is clean and fully complies with green building construction standards.

4. Simple technology and easy to operate
The new steel support system is easy to install and operate, requiring only simple training during installation.
5. High construction efficiency and short construction period
Compared with the traditional formwork steel support system, the construction efficiency is higher, which can greatly shorten the construction period, save the management cost of the construction unit, and shorten the development cycle for real estate developers.
6.Wide range of applications
The steel support system is suitable for all shear wall structures, frame shear structures, frame structures, large underground parking lots, etc.
The emergence of the new steel support system breaks the bottleneck of traditional reinforcement and solves many problems existing in traditional reinforcement. For traditional formwork reinforcement support, the technology is backward, the material utilization rate is extremely low, and the traditional wooden backing is used, which is not possible. The standards are not standardized either. Since different buildings have different heights, wood often needs to be cut off to meet construction needs, which wastes construction costs and seriously damages forest resources.
The new formwork steel support and reinforcement system is forged and processed from high-quality square steel and treated with deep anti-corrosion technology, which not only ensures the product's sturdiness and non-deformation, but also has a wear-resistant surface and a high reusability rate.
The various components of the entire system are closely connected and cooperate reasonably, so that the main body of the building is evenly stressed and the structure is stable. It can well solve the horizontal and vertical loads caused by wind loads or earthquakes on the building shear walls. It is an ideal construction site construction The only choice.