We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.
we have obtained ISO 9001, ISO 14001, ISO 45001, CE, AAA-level credit rating certification, etc.
we have obtained ISO 9001, ISO 14001, ISO 45001, CE, AAA-level credit rating certification, etc.
EN10216-2 is specification made for seamless steel tubes for specified elevated temperature purposes as boiler tube, power plants, etc, it has following steel grades: P195GH, P235GH, P265GH, 16Mo3, 14MoV6-3, 13CrMo4-5, 10CrMo9-10, with non-alloy and alloy steel included. EN 10216-2 specifies the technical delivery conditions in 2 test categories for seamless tubes of circular cross section
Specification
OD: 10.2mm-720mm
WT: 1.2mm~12mm
Length: 5-12m or as to customer requirement
Application: Hydraulic system pipeline pipe, pipe for boiler project, construction structure, etc.
Supplementary Technology: Plain or threaded with socket or beveled with plastic caps, hydraulic testing, eddy current, Infrared test.
Surface: Painting, oil coating, Anti-corrosion & Insulation.
Delivery state: Hot Rolled, Cold Drawn.
Steel Grade: P195GH, P235GH, P265GH, 16Mo3, 14MoV6-3, 13CrMo4-5, 10CrMo9-10.
Chemical Composition
Steel grades |
EN10216-2 CHEMICAL COMPOSITION (LADLE ANALYSIS) |
|||||||||||||
C% max |
Si% max |
Mn% max |
P% max |
S% max |
Cr% max |
Mo% max |
Ni% max |
Al.cał% min |
Cu% max |
Nb% max |
Ti% max |
V% max |
Cr+ Cu+ Mo+ Ni% MAX |
|
P195GH |
0.13 |
0.35 |
0.70 |
0.025 |
0.020 |
0.30 |
0.08 |
0.30 |
≥ 0.020 |
0.30 |
0.010 |
0.040 |
0.02 |
0.70 |
P235GH |
0.16 |
0.35 |
1,20 |
0.025 |
0.020 |
0.30 |
0.08 |
0.30 |
≥ 0.020 |
0.30 |
0.010 |
0.040 |
0.02 |
0.70 |
P265GH |
0.20 |
0.40 |
1,40 |
0.025 |
0.020 |
0.30 |
0.08 |
0.30 |
≥ 0.020 |
0.30 |
0.010 |
0.040 |
0.02 |
0.70 |
16Mo3 |
0.12- 0.20 |
0.35 |
0.40- 0.70 |
0.025 |
0.020 |
0.30 |
0.25- 0.35 |
0.30 |
≥ 0.020 |
0.30 |
- |
- |
- |
- |
14MoV6-3 |
0.10- 0.15 |
0.15- 0.35 |
0.40- 0.70 |
0.025 |
0.020 |
0.30- 0.60 |
0.50- 0.70 |
0.30 |
≥ 0.020 |
0.30 |
- |
0.22-0.28 |
- |
- |
13CrMo4-5 |
0.15 |
0.50- 1,00 |
0.30- 0.60 |
0.025 |
0.020 |
1,00- 1,50 |
0.45- 0.65 |
0.30 |
≥ 0.020 |
0.30 |
- |
- |
- |
- |
10CrMo9-10 |
0.10- 0.17 |
0.35 |
0.40- 0.70 |
0.025 |
0.020 |
0.70- 1,15 |
0.40- 0.60 |
0.30 |
≥ 0.020 |
0.30 |
- |
- |
- |
- |
Mechanical Property
EN 10216-2 Mechanical properties |
|||||||||||||
Steel grades |
Mechanical properties during tensile testing in room temperature |
Resilience |
|
||||||||||
Upper yield limit or yield strength Re or R0.2 for wall thickness of t min |
Tensile strength Rm |
|
Minimum energy average absorbed KVJ at the temperature of 0°C |
|
|||||||||
T≤16 |
16<T≤40 |
40<t≤60 |
60<T≤60 |
I |
T |
|
|||||||
MPa |
MPa |
MPa |
MPa |
MPa |
I |
t |
20 |
0 |
-10 |
20 |
0 |
|
|
P195GH |
195 |
- |
- |
- |
320- 440 |
27 |
25 |
- |
40 |
28 |
- |
27 |
|
P235GH |
235 |
225 |
215 |
- |
360- 500 |
25 |
23 |
- |
40 |
28 |
- |
27 |
|
P265GH |
265 |
255 |
245 |
- |
410- 570 |
23 |
21 |
- |
40 |
28 |
- |
27 |
|
16Mo3 |
280 |
270 |
260 |
- |
450- 600 |
22 |
20 |
40 |
- |
- |
27 |
- |
|
14MoV6-3 |
320 |
320 |
310 |
- |
460- 610 |
20 |
18 |
40 |
- |
- |
27 |
- |
|
13CrMo4-5 |
290 |
290 |
280 |
- |
440- 590 |
22 |
20 |
40 |
- |
- |
27 |
- |
|
10CrMo9-10 |
280 |
280 |
270 |
- |
480- 630 |
22 |
20 |
40 |
- |
- |
27 |
- |
|
Equivalent steel grade
Steel Grade |
Steel Standard |
Steel Grade |
Steel Standard |
Steel Grade |
P235GH |
DIN 17175 |
St 35.8 |
|
|
P265GH |
DIN 17175 |
St 45.8 |
|
|
16Mo3 |
DIN 17175 |
15Mo3 |
|
|
10CrMo55 |
|
15Mo3 |
BS 3606 |
621 |
13CrMo45 |
DIN 17175 |
|
BS 3606 |
620 |
10CrMo910 |
DIN 17175 |
13CrMo44 |
BS 3606 |
622 |
25CrMo4 |
|
10CrMo910 |
|
|
P355N |
DIN 17179 |
StE 355 |
|
|
P355NH |
DIN 17179 |
TStE 355 |
|
|
P355NL1 |
DIN 17179 |
WStE 460 |
|
|
P460N |
DIN 17179 |
TStE 460 |
|
|
P460NH |
DIN 17179 |
WStE 460 |
|
|
P460NL1 |
DIN 17179 |
TStE 460 |
|
|